A bore cut is when you insert the tip of.

Nov 27, How to make a felling cut Straight from behind felling cut. For small trees, the easiest way to saw the felling cut is straight from behind.

Cutting down a tree so that it falls into another tree could start a potentially dangerous domino effect.

This Bore cutting. To be able to perform the safe corner method and turn around method you need to master bore cutting. Safe corner method. As Estimated Reading Time: 7 mins. Make A Back Cut When your V-shaped cut is ready, go to the opposite side of the tree and make another cut.

This cut should be made about 3 inches above the bottom of the V-shaped cut. Make the back cut go deep into the middle, but let it not meet the tip of the V-shaped cut in treecutter.barted Reading Time: 7 mins. Apr 09, Make the bore cut well back of the hinge until you have cut all the way through the tree.

Cutting through the strap from the outside is quick and easy.

Then carefully cut towards the hinge until it is the correct size; the hinge length should be about 80 percent of the tree’s diameter at breast height (D.B.H.), the hinge thickness should be about 10 percent of the tree’s D.B.H. Jul 10, Once the front notch is cut, you can then make the back cut with your chainsaw. The back cut is what disconnects the tree from the stump and creates a hinge for the tree to fall.

The width of the back cut should be about 10% of the diameter of the tree trunk. Stop cutting when you’re a few inches away from the notch.