Fortunately, no one was hurt.

May 28, Using a high-lift Jack to remove tree stumps as well as rose bush root balls and other hedge stumps has been invaluable in our yard. Keep a 2 x 4 underneath.

Aug 18, - Remove Bushes and Stumps the Easy Way With a Farm Jack (AKA Hi-Lift Jack): We recently bought a year old house, and the previous owners loved unruly bushes and trees. We had quite a few that were touching the roof of the house or spilling over onto the neighbors driveway, so we decided to get rid of the bushes an.

Dec 17, - Remove Bushes and Stumps the Easy Way With a Farm Jack (AKA Hi-Lift Jack): We recently bought a year old house, and the previous owners loved unruly bushes and trees. We had quite a few that were touching the roof of the house or spilling over onto the neighbors driveway, so we decided to get rid of the bushes and tr Estimated Reading Time: 9 mins.

You can use a Hi Jack or Handyman jack to remove a tree stump.

But larger stumps can involve so much work that it's not practical-unless you can drag it out of the earth with a chain attached to the back of a pickup.

All you need is a chain, handyman jack, two 2×4’s and a bolt. First cut the 2×4’s to 6 feet and drill a hole in the top of each. Bolt the 2×4’s to the top of the jack so it makes a tripod.

You can also purchase a handyman jack to remove a tree stump. You’ll also need a chain and two 2x4s, along with a bolt. To do this method, start by cutting your boards to six feet. Drill a hole into the top of each, then bolt them to the top of the jack so it forms a tripod. Aug 17, A tree stump can be removed at any time after the tree is felled, but manual removal is sometimes easier if the stump has aged and dried out somewhat.

If you have the ability to let the stump remain in place for a full year or even two, the dried wood may be easier to cut out than when working on a new stump that is still treecutter.barg: handy jack. Drill Holes in the Stump. Cut off as much of the top of the stump as possible with your chainsaw. Use a 1-inch spade bit with a spade bit extension to drill evenly spaced holes roughly every 6 to 8 inches around the perimeter of the stump.

Make the holes about 12 inches deep and Missing: handy jack.